Google Pixel 3 xl battery size how Big?

6 min read

Google Pixel 3 xl battery size, screen size and price are the main differences between Google 2018 flagship phones that are both big budget alternatives to the newer 4XL.

Google Pixel 3 xl battery size how Big?
Google Pixel 3 xl battery size how Big?

My Favorite Content: Google pixel 3 sim card size with eSIM?

How big is the pixel 3 XL battery?

The last major difference between the pixel 3 XL battery and Pixel 3. The Pixel 3 uses a 2915-mAh battery, while the pixel has a 3 XL 3430-mAh battery. Laboratory results for the continuous playback of videos on the flight mode gave an average of 15 hours for the pixel 3 and 16 hours, 49 minutes for the pixels 3 XL.

How big is the pixel 3 XL battery?
How big is the pixel 3 XL battery?

Pixel 3 XL Battery

  • Battery with Non-removable Lithium-Po 3430 mAh battery
  • Ready Fast charging 18W
  • USB Power Delivery 2.0
  • QI wireless charging support Charger Stand

Review Google Pixel 2 xl in Battery Size

  • Battery wiht Non-removable Li-Ion 3520 mAh battery
  • Support Fast charging (capped at 10.5W)
  • USB Power Delivery 2.0

Pixel 3 Phone Battery Size

  • Battery with Non-removable Li-Po 2915 mAh battery
  • Support Fast charging 18W
  • USB Power Delivery 2.0
  • QI wireless charging Support Charger Stand

Google Pixel 4 size Battery

  • Battery wiht Non-removable Lithium-Po 2800 mAh battery
  • Support Fast charging 18W
  • USB Power Delivery 2.0
  • QI wireless charging Support Charger Stand

My Favorite Content: Google Pixel 3 camera megapixels : Best Photography?

How long does the Google pixel 3 XL battery last?

At about $ 100 more the pixel has 3 XL a larger screen and longer battery life. This is great if you play a lot of video games or even see, but keep in mind, the phone also has a large notch at the top. We do not believe it is worth the extra $ 100 (for the money you can have multiple phone cases, a Google homepage Mini or wireless earphones get), However, if you have a budget, please buy it.

How long does the Google pixel 3 XL battery last?
How long does the Google pixel 3 XL battery last?

My Favorite Content: Google Pixel 2 camera megapixels Spesial Camera Shots?

How do I change the battery in my pixel 3 XL?

Step 1 Heating to the edge of the rear wall

  • A hairdryer, heat gun or hot plate can also be used, but be careful, the phone display and internal battery can not be overheated, both prone to heat damage. apply it to the right edge of the back wall for a minute.
  • While you wait for the following areas on the back, note:
  • Strong adhesive, there are large patches of adhesive near the bottom of the phone.
  • Fingerprint sensor cable to be careful not to slice through the cable as you lever.
My Favorite Video: How do I change the battery in my GOOGLE Pixel PHONE?

Step 2 Create a gap under the back wall

  • Applying a suction cup to the heated edge of the rear wall, as close to the edge as possible.
  • Pull to create a gap in the suction cup with a strong, stable force.
  • Depending on the age of your phone, this can be difficult. If you have problems, apply heat to the rim and try again.
  • Enter the point to take an opening into the gap.

Step 3 Dissolving the right edge adhesives

  • Slide the opening Pick along the right edge to slice through the adhesive.
  • The adhesive rubber and is difficult to slice, once it has cooled. When that happens, re-apply heat to the edge to facilitate cutting.
  • Once you have cut through the edge of the seam blank in an opening of the adhesive pick again to prevent sealing.

Step 4 Heating to the bottom edge of the rear wall

  • Apply a heated iOpener on the floor of the back wall for a minute.

Step 5 Disc through the bottom adhesives

  • Use Pick an opening disk to the lower right corner and continue along the lower edge of the phone.
  • Work slowly, like the corner cut the plate to avoid cracking. When the cutting is hard, again apply heat.
  • Let’s avoid sealing a selection from the edge of the adhesive from recovery.

Step 6 Washer through the remaining edges

  • cut further warming and the remaining edges of the phone.
  • Be careful as you cut on the left edge of the phone into slices. If your choice feels like it near the top of stucco, you have hooked the fingerprint sensor. Drag the pick of the seam slightly and try again.
  • Be sure to cut through the thick portions glue near the bottom and right edges of the phone.

Step 7 Slice through the remaining adhesive

  • lever gently to the right edge of the rear wall.
  • Use of an opening Picks slice through any remaining adhesive along the edges.

Step 8 Fold the rear wall

  • Vibrates the right edge of the rear wall upwards and is the peeling disc along the left side of the phone.
  • Be sure to keep slack on the fingerprint sensor cable and prevent it not pinched.
  • When assembling this is a good point to power on your phone and test all functions before sealing. Be sure that your phone is fully in power back down before continuing.
  • During assembly follow this guide to install Custom cut adhesives for the back plate.

Step 9 Remove the fingerprint sensor band

  • carefully peel users’ tweezers and remove the yellow tape across the fingerprint sensor port.

Step 10 Pull the fingerprint sensor

  • Use spudger carefully fold the point of the black locking bar on the fingerprint sensor of the ZIF socket.
  • Grasp the tab of the cable with your fingers or tweezers and gently the flex cable going from the outlet.
  • To short-circuit to avoid, be careful not to touch the metal contacts on the flex cable with tweezers.

Step 11 Remove the back

  • Remove the back panel.

Step 12 Remove the metal cover mounting screws

  • Remove the four screws T3, the metal cover bracket:
  • Three 4-mm long screws
  • A 3 mm long screw

Step 13 Remove the metal cover bracket

  • Insert the flat end of a spudger below the upper-right edge of the metal bracket and lever in order to solve it.
  • Remove the metal cover bracket.

Step 14 Disconnect the battery

  • Use separates the point of a spudger lever and the battery plug from the socket.
  • Make use of metal tools to disconnect the battery, or you risk short-circuit the battery.
  • Bend the battery cable so that the plug does not accidentally touch the socket.

Step 15 Separating the charging coil

  • Use the point of a spudger pry and separate the charging coil connector from the motherboard near the right edge of the phone.

Step 16 Discs under the charging coil

  • Please enter the point a hole underneath an edge of the charging coil take.
  • Pushing the pick along the edge to the adhesive solution.
  • A disc as deep as you can while taking care not to puncture the battery surface.

Step 17 Apply adhesive remover under the coil

  • Tilt the edge you been upward have cut.
  • While holding the phone in a tilted position, a few drops of adhesive remover or a high concentration of isopropyl alcohol are along the edge.
  • Keep enabling the phone in this position for a minute or two of the adhesive to soften.

Step 18 Disc through the coil adhesive

  • accommodate the insertion of the flat end of an opening below a corner of the loading coil.
  • Slide the pick slowly and firmly under the coil around the adhesive to solve.
  • The adhesive is mainly around the periphery of the wireless coil. Use the opening Pick slowly slice through the adhesive.
  • When the glue to cut the telephone by, tilt-up and apply a few drops of adhesive remover hard to the touch.

Step 19 Remove the charging coil
Remove the wireless charging coil.
To install a spare spool:

  • Be sure to clean the battery surface of an adhesive residue. Be very careful not to puncture the battery.
  • Connecting the wireless coil connection to the motherboard connector. This ensures that the coil is properly aligned.
  • Peeling any adhesive backing on the spare spool from.
  • Place the coil on the top of the battery and press firmly into position.

Step 20 Remove the tape

  • Put the point of a spudger in the gap along the upper edge of the battery.
  • Slowly push the point along the gap from the battery of the insulating tape to lift and fix them.
  • Fold the tape away from the battery.

Step 21 Remove the battery pull tabs

  • Gently pushes the tip of a spudger below the pull tabs yellow battery along the upper edge of the battery folded.
  • Disconnect the pull tabs from the battery.

Step 22 Place a bracing Pick

  • There are steep, sharp edges near the top of the battery, which can easily break the tape when he pulled out.
  • accommodate insertion of the flat end of an opening, in the gap across the battery, behind a yellow pull tab.
  • The wedge that brings firmly under the battery. The pick will serve as a buffer for the adhesive tape and a fulcrum.

Step 23 Remove the battery tape

  • Pull-on the yellow adhesive pull tab at a slow, steady pressure. Try your best to pull it as flat an angle (vs. straight up) as possible.
  • As you pull on the adhesive flap, the pressure keeps on opening it underneath the battery so much get wedged possible.
  • When the glue stick feels, you can apply a few drops of adhesive remover or high concentration of isopropyl alcohol in the gap to help solve the battery. These two strips will most likely solve all at once.
  • Repeat the process with the second adhesive pull tab.

Step 24 Remove the battery
The battery can not be reused after it has been removed, as this is a potential security risk. Insert a new battery.
To install a replacement battery:

  • Remove any remaining glue well from the battery.
  • Temporarily reconnect the battery connector on its motherboard socket. This ensures that the battery is properly aligned.
  • Applying pre-cut adhesive or double-sided adhesive tape Scotch well to the battery.
  • Insert the battery into the phone and press it firmly in place.
  • Disconnecting the battery connector from its socket and continuing motherboard assembly.
How do I change the battery in my pixel 3 XL?
How do I change the battery in my pixel 3 XL?

My Favorite Content: Google pixel 3a camera megapixels Check it Out

How wide is the Google pixel 3 XL?

The pixel-3 XL is larger and heavier than the pixels 3, 6.2 to 3, the pixel ES 5.7 to 2.7-inch body is measured by 3 inches. The two phones have the same 0.3 inches (8.2 mm) deep. Because of the larger size of the pixel 3 XL, it is heavier at 6.5 ounces (184 grams). The pixel-3 weighs 5.2 ounces (148 grams).

How wide is the Google pixel 3 XL?
How wide is the Google pixel 3 XL?

My Favorite Content: Google Pixel 4 xl screen size Best Dimension?

okay, I hope the Google Pixel 3 xl battery size article will be enlightened. and you can immediately decide whether you want to buy this smartphone or not.meet in the next useful article.

is Pixel A Series Compatible With Wireless Charging?

Pixel A Series Wireless Charging Pixel A Series Wireless Charging | The Pixel 3 and 3 XL are the best Android phones you can...
admin
1 min read

Google Pixel 7 Pro Screen Size – How It…

Google Pixel 7 Pro Screen Size The Pixel 7 Pro features a large screen with a resolution of 1440 x 3120 pixels. This means...
admin
1 min read

Google Pixel 4 Battery Life | We are Very…

Google Pixel 4 Battery Life Google Pixel 4 Battery Life Table Of Contents 1. Google Pixel 4 Battery Life 2. Pixel 4 Battery Life...
admin
2 min read

Leave a Reply

Your email address will not be published. Required fields are marked *